Software Current Releases

JetStream

All JetStream software is pre-loaded on the unit. Contact Technical Support for further assistance.

Audio Engine v3

The following software may only be used with a version 3.x Audio Engine. If you are uncertain of which version of engine that you own, contact Technical Support for assistance.

All version 3.x Audio Engines should use PC Software version 3.6. Supervisor, AE Config, and Command Builder should be treated as a matched set, therefore when upgrading one application from version 3.5.x to version 3.6.x you must upgrade all applications to version 3.6.x.

Right-click to save each file.

If you would like to check to see if the software you have installed is current, there are two ways to
check the version number:

1. In the program, right-click the Logitek logo in the upper left corner of the screen. An about box will appear.

2. In Windows Explorer, right-click on the executable and choose Properties, then choose the Details tab.

Setup 3.6 – While this wizard is not required for installation, it does assist when upgrading all applications
from version 3.5 to 3.6. 284 KB EXE

Supervisor 3.6 – Connects to all Audio Engines and creates a gateway for all other Logitek applications
and guest connections from automation systems to communicate with the engines. 961 KB EXE | Version 3.6.4.29

AE Config 3.6 – Audio Engine Configuration Software. 855 KB EXE | Version 3.6.4.9

Command Builder 3.6 – Macro Scripting Language Editor. 769 KB EXE | Version 3.6.3.8

Hex Comm 3.6 – Hexadecimal Communications Program. Used to troubleshoot serial and
IP vGuest connections. 425 KB EXE | Version 3.6.1.0

Matrix IP 3.6 – Matrix Routing Software. This program requires a paid license key to connect to Supervisor.
Contact Technical Support for details. 409 KB EXE | Version 3.6.1.0

vButton 3.6 – Virtual Button Software. 403 KB EXE | Version 3.6.3.1

vChange 3.6 – Application pops up when the change button is pressed on the Artisan and Mosaic consoles
to provide a larger size view of the information over the fader. 357 KB EXE | Version 3.6.1.0

vDelay – Provides PC control of the profanity delay. SHARC Attack DSP cards required.
Not for use with Artisan consoles. 376 KB EXE | Version 3.6.2.1

vFader 3.6 – Provides one to 4 virtual faders. This program requires a paid license key to
connect to Supervisor. Contact Technical Support for details. 393 KB EXE | Version 3.6.1.0

vManager 3.6 – Watchdog program ensures that Supervisor program is always running. 352 KB EXE | Version 3.6.1.0

vMix 3.6 – Virtual Mixing Console. This program requires a paid license key to connect to Supervisor.
Contact Technical Support for details. 420 KB EXE | Version 3.6.3.3

vRoute 3.6 – Virtual Router 379 KB EXE | Version 3.6.2.1

vScreen Designer 3.6 – Used to design custom GUI and meter displays to run on a PC. 1.06 MB EXE | Version 3.6.3.0

vScreen Player 3.6 – This program displays the custom GUI and meter displays on a PC as created by vScreen Designer.
A paid license key is required to connect to Supervisor. Contact Technical Support for details. 427 KB EXE | Version 3.6.3.0

vSnapshot 3.6 – PC interface to capture and recall console “scenes.”
For use with Artisan and Mosaic consoles. 569 KB EXE | Version 3.6.1.0

vTranslator 3.6 – Universal translation program to interface to other routers and automation systems
via serial or UDP. 523 KB EXE | Version 3.6.2.1

Audio Engine v2

The following software is a legacy release for all version 2 Audio Engines. Only version 2 Audio Engines are compatible. Contact Technical Support if you are unsure of what version you own.

AE Config – Audio Engine configuration program for version 2.x 288KB EXE | 29 January 2002
Supervisor and virtual clients in version 2 were optional programs and sold separately when version 2 was on the market. Version 2 customers with valid licenses for Supervisor should contact Technical Support for a replacement copy.
New licenses for version 2 Supervisor or virtual clients are no longer available.